Home Page
   Articles
       links
About Us    
Traders        
Recipes            
Latest Articles
Re-using plastics.
Page Previous  1, 2, 3, 4
 
Post new topic   Reply to topic    Downsizer Forum Index -> Reduce, Reuse, Recycle
Author 
 Message
gregotyn



Joined: 24 Jun 2010
Posts: 2201
Location: Llanfyllin area
PostPosted: Thu Nov 20, 14 3:22 pm    Post subject: Reply with quote
    

I am not sure where the treatment harms the operator as one is supposed only to use tanalith in a pressure treatment plant and it should not be applied by hand and treated timber should only be handled with gloves. The treatment goes into the timber almost by default as the first part of the treament process in the cylinder is to vacumm the wood to remove as much sap as possible. There is a problem with spruce as its cell structure is different to other timbers.
After the vacumn process and evacuation of liquid, the plant fills with tanalith treatment solution at the correct dilution and is forced into the timber by pressure. You should only handle pressure treated timber when it has dried, indeed it should not be moved from the plant until it has dried. After I went on the course for treatment by tanilith at Rentokil, I realised that this was not for me as I worked for people who would not want to wait for the treatment to cure and the timber to dry first, I ran the sawmill instead and pleased to do so as what I suspected proved to be right. As I understand the situation it may have been possible to obtain tanilising chemicals 'under the counter' and subsequently do a bad job of treatment and with potential health risk.

Ty Gwyn



Joined: 22 Sep 2010
Posts: 4562
Location: Lampeter
PostPosted: Thu Nov 20, 14 7:02 pm    Post subject: Reply with quote
    

As someone who has worked with timber David,you will know,

Spruce has a much more open structure compared to Larch,and tends to take in the Tanalising much better,Larch is more dense in structure and takes in less Tanalinth,

And by poor results in a lot of posts having a short lifespan,i`m sure Larch is the preferred timber for use by the treatment companies.

Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Thu Nov 20, 14 7:36 pm    Post subject: Reply with quote
    

Is larch not naturally durable?

Ty Gwyn



Joined: 22 Sep 2010
Posts: 4562
Location: Lampeter
PostPosted: Thu Nov 20, 14 8:15 pm    Post subject: Reply with quote
    

Hairyloon wrote:
Is larch not naturally durable?


Only European Larch as far as i know,its rough bark stands out from the commercially grown more commonly Japanese Larch.

Mistress Rose



Joined: 21 Jul 2011
Posts: 15539

PostPosted: Fri Nov 21, 14 7:53 am    Post subject: Reply with quote
    

I think larch has reasonable natural durability if it is really well seasoned by air drying, but otherwise, not much better than most softwoods.

David, I don't think your sawmills was the only one to try to rush the process. Chromium can give some very nasty ulcers, and of course arsenic is a known poison. We are being sold 'special' treated softwood posts now that are supposed to have a 10 year life with only copper treatment, but it sounds as if this 'special' treatment is what the tanallising was supposed to be in the first place. This leads me to suspect that most posts were just duncked in the treatment bath, seasoned or not, and didn't get fully impregnated, just coated.

As I said, we try to use chestnut now as it is naturally durable, and being in the south, there are plenty of them cut quite close to us.

Ty Gwyn



Joined: 22 Sep 2010
Posts: 4562
Location: Lampeter
PostPosted: Fri Nov 21, 14 11:06 am    Post subject: Reply with quote
    

Chris,
What are the prices for these Chestnut stakes down your end?

As i noticed the other day there is somewhere fairly local to here now selling them.

gregotyn



Joined: 24 Jun 2010
Posts: 2201
Location: Llanfyllin area
PostPosted: Fri Nov 21, 14 4:37 pm    Post subject: Reply with quote
    

It is true the spruce is more open than larch but the cell structure of the timber itself is less permeable than the cell structure of larch or douglas fir. The treatment will go into the spruce but a lot of it comes out and according to the "experts" at Rentokill thats why it rots sooner than larch. Tanilising is a mechanical process and dunking timber into a bath of chemical and water is not true tanilising, it relies on pressure and vacumn, for specific times, I would be surprised if you could buy a set up for less than £100k, but I'm not up on prices now been out of it for about 30 years. I am not so sure how just copper will kill all in timber, but is better I think than creosote from a health point of view! Presumably the copper is in the form of copper sulphate.
I would buy Larch posts over Spruce any day, John, for the above reason, but I'll make enquiries to make sure!

VM



Joined: 23 Nov 2007
Posts: 1748
Location: Lincolnshire
PostPosted: Fri Nov 21, 14 10:29 pm    Post subject: Reply with quote
    

Just going back to plastics for a moment - and I know this is a company rather than home recycling, but nevertheless thought they are interesting:

https://www.solwayrecycling.co.uk/about-solway-recycling

Mistress Rose



Joined: 21 Jul 2011
Posts: 15539

PostPosted: Sat Nov 22, 14 7:19 am    Post subject: Reply with quote
    

The prices one of our coppice group members gave in the spring are'
Round post £1 per ft.
Fencing stake 1/4 cleft £1.80

Haven't tried prices from our normal supplier recently, as we haven't been using many fencing stakes.

VM, Solway really have the recycled plastic market covered don't they. Don't know how long lasting the products are, and if they tend to warp or bend with age, but a good use for recycled plastic.

I was reading an article in Chemistry World yesterday about breaking down plastic and reusing the monomers. Not the sort of thing even you would do at home though Hairyloon.


Hairyloon



Joined: 20 Nov 2008
Posts: 15425
Location: Today I are mostly being in Yorkshire.
PostPosted: Sat Nov 22, 14 9:57 am    Post subject: Reply with quote
    

Because it sounds daft, not because I cannot...

Mistress Rose



Joined: 21 Jul 2011
Posts: 15539

PostPosted: Sun Nov 23, 14 9:36 am    Post subject: Reply with quote
    

It involves equipment that you couldn't have at home, hydrogen, and lots of specialist expertise. It is only financially viable if you are using the broken down chemicals as feedstock for higher value material. Definitely a future industrial process, not for Hairyloons back yards.

Post new topic   Reply to topic    Downsizer Forum Index -> Reduce, Reuse, Recycle All times are GMT
Page Previous  1, 2, 3, 4
Page 4 of 4
View Latest Posts View Latest Posts

 

Archive
Powered by php-BB © 2001, 2005 php-BB Group
Style by marsjupiter.com, released under GNU (GNU/GPL) license.
Copyright © 2004 marsjupiter.com