|
![](templates/downsizer2009/images/menu_margin.png) |
Author |
|
Message | ![](templates/downsizer2009/images/menu_margin.png) |
|
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
sean Downsizer Moderator
Joined: 28 Oct 2004 Posts: 42207 Location: North Devon
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Shan
Joined: 13 Jan 2009 Posts: 9075 Location: South Wales
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Slim
Joined: 05 Mar 2006 Posts: 6540 Location: New England (In the US of A)
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Nick
Joined: 02 Nov 2004 Posts: 34535 Location: Hereford
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Shan
Joined: 13 Jan 2009 Posts: 9075 Location: South Wales
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
NorthernMonkeyGirl
Joined: 10 Apr 2011 Posts: 4590 Location: Peeping over your shoulder
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Nick
Joined: 02 Nov 2004 Posts: 34535 Location: Hereford
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
jema Downsizer Moderator
Joined: 28 Oct 2004 Posts: 28118 Location: escaped from Swindon
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Nick
Joined: 02 Nov 2004 Posts: 34535 Location: Hereford
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
Hairyloon
Joined: 20 Nov 2008 Posts: 15425 Location: Today I are mostly being in Yorkshire.
|
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
dpack
Joined: 02 Jul 2005 Posts: 45514 Location: yes
|
Posted: Sat Oct 07, 17 11:18 pm Post subject: |
|
ok i have my general purpose kitchen blade in front of me , i will try to describe it.
the handle is roughly symmetrical but with a slight dimple for the thumb, the handle/tang is hand sized
the blade is 4mm thick, 125 mm long and 60 mm wide ie rectangular
the ridge to end has a rounded corner with a 6mm hole through it
think small cleaver
it is made of forge welded steels in the jacobs ladder pattern ( rather nice metal )
it came with an "unhanded" edge with a hollow ground form of about 15mm and was edged for about 1.5mm at 20 degrees
i have improved on that
on the thumb side it now has a flat ground edge about 5mm wide retaining the hollow grind behind that
on the finger side it is flat ground for about 18 mm from the edge, this gives a slightly wavy line between the edge and flat due to the metal being forged rather than pressed.
the ground surfaces are then polished with a good fine stone ( not cheap nasty carborundum )
the edge can be resharpened with a diamond steel quite a lot before a minor regrind becomes necessary.
sharpening with a good waterstone (arkansas greenstone or wichita whitestone are even better than the japanese stuff ) should be a skill learned by any blade user
mine is right handed ie hold the food in the left hand and slices come off to the right with no vacuum adhesion to the slice or the lump.
as a general cooks blade for anything from dismantling a raw chicken or cubing beef via peeling ginger or coring a pepper to fine slicing a cucumber it is ideal, it will slice,dice,chop herbs, crush garlic, scoop stuff off the board . tis pretty handy for opening packaging and the ridge is ideal for cracking bones for stock.
tis a beasty and if i had to save one blade in an emergency it would be that one as i recon i could build a house and make a fire as well as cook dinner with it.
that sort of handedness style can be ground from any unhanded blade of a decent build quality
my tojiro slicing knife is similarly handed and made of a 128 fold white steel combo with a cloud hamon
being much thinner it misses the hollow ground aspect simply having one side at a slightly steeper angle than the other which is flat, again it still demonstrates handedness that does not work well for using in the "wrong"hand.
of my antiques the boning knife is ambidextrous as is my curved small butchers knife cos i find it best to be ambidextrous when dealing with a carcase
my hook style tojiro prep knife (64 fold white steels ) is right handed and again has the grind it came with ie one side sharpened flat the other at a slight angle
all that said how much do you want to spend?
there are some fairly decent stainless blades which can be sharpened properly or used with an unhanded edge even among the basics of commercial kit but if you really want a good knife it either takes lots of cash or lots of looking .
ps really good blades are not dishwasher safe which is a bit of a faff but hey ho tis worth a quick wash in hot water to have an easy time cutting |
|
|
|
![](templates/downsizer2009/images/spacer.gif) |
|